How to Fix Elementor White Screen When Editing Page (Complete Guide)
11 mins read

How to Fix Elementor White Screen When Editing Page (Complete Guide)

Mike0

Table of Contents

Introduction

Elementor is one of the most popular page builders for WordPress. It allows users to build pages using a visual editor without writing code. But sometimes, Elementor shows a blank screen when editing a page. This issue can be confusing and frustrating for many users.

You may try to open a page in Elementor, and instead of seeing the editor, you get a white screen. This problem is known as the “Elementor White Screen of Death.” It prevents you from editing your site, even though the live page still works.

This issue affects both new and experienced WordPress users. You may also see the editor loading forever or crashing. These symptoms all point to the same problem: Elementor not opening pages properly in the backend.

What Is the Elementor White Screen of Death?

The Elementor White Screen of Death happens when you try to edit a page, but the screen turns blank. The editor doesn’t load, or it freezes. It’s called a “white screen” because that’s all you see — no text, no tools.

This error is common in WordPress, not just Elementor. But in this case, it only affects the Elementor editor, not your full website. Your visitors may still see your site normally.

Here are some signs of this issue:

  • The Elementor editor shows a blank white screen
  • The edit page never fully loads
  • You see a spinning icon that doesn’t stop
  • You can’t click or edit any section

This is different from a website crash. The white screen only affects the admin area while editing with Elementor. It can appear on specific pages or the whole site.

Some users call it:

  • Elementor not opening pages
  • Elementor edit page shows blank
  • Blank screen when editing in Elementor

Causes of the Elementor White Screen

When Elementor shows a blank screen, there are usually technical issues behind it. These issues may seem small but can cause big problems. In this section, we will look at the most common reasons why Elementor edit page shows blank.

Let’s go through each cause, so you can check them on your site.

  1. PHP Memory Limit Is Too Low

Elementor needs enough memory to work smoothly. If your server has low memory, the editor may fail to load. This can cause the WordPress white screen issue.

WordPress uses PHP memory to run plugins and themes. When the limit is too low, Elementor can’t load all its scripts.

What you might see:

  • Blank screen when editing in Elementor
  • Editor loads halfway and then freezes

Solution: Increase the PHP memory limit to at least 256MB.

  1. Plugin Conflicts

One of the most common causes is a plugin conflict. Elementor may stop working properly if another plugin breaks the editor.

Some third-party plugins don’t follow coding rules. They can block scripts, create errors, or crash the page builder.

Common conflict plugins:

  • Caching plugins
  • Security plugins
  • Outdated Elementor add-ons

Solution: Deactivate all plugins except Elementor. Then reactivate one by one to find the problem.

  1. Outdated Themes or Plugins

Old versions of themes or plugins can cause problems with Elementor. New Elementor versions may not work with outdated code.

This mismatch leads to:

  • Elementor not opening pages
  • Page builder crashing when editing

Solution: Keep Elementor, WordPress, your theme, and all plugins updated.

  1. JavaScript Errors

Elementor is a JavaScript-heavy plugin. If scripts break, the editor shows a white screen. These errors are not always visible. You need to open your browser’s console to check.

Signs of JS errors:

  • Editor freezes
  • Buttons stop responding
  • Console shows red error messages

Solution: Check the browser console for issues and fix or report them.

  1. Server or Hosting Issues

Cheap hosting plans often have limited resources. This affects how Elementor loads. Some hosting servers also block key functions Elementor needs.

Possible issues:

  • Firewall blocks
  • Low processing power
  • Poor server settings

Solution: Use a trusted host that supports Elementor. U.S.-based hosts like SiteGround, Bluehost, or Kinsta work well.

How to Fix Elementor White Screen Error (Step-by-Step Guide)

Now that you understand the causes, it’s time to fix them. In this section, we’ll walk you through the most effective ways to fix the Elementor white screen of death. These steps are easy to follow, even if you’re not a developer.

WooCommerce Add to Cart Button Not Showing on the Shop Page

Let’s get started with the solutions.

  1. Increase PHP Memory Limit

Low PHP memory is a common reason Elementor shows a blank screen. WordPress needs memory to run plugins, themes, and functions. When it runs out, things stop working.

To fix this, you need to raise the memory limit.

Here’s how you can do it:

  • Log in to your website’s File Manager using cPanel or FTP.
  • Open the wp-config.php file from your site’s root folder.
  • Add the following line before the line that says “That’s all, stop editing!”

define(‘WP_MEMORY_LIMIT’, ‘256M’);

  • Save the file and reload the editor.

This change gives WordPress more power to load Elementor fully.

  1. Deactivate All Plugins Except Elementor

Sometimes, a plugin blocks Elementor from loading. To find the issue, disable all plugins except Elementor and Elementor Pro (if used).

Follow these steps:

  • Go to WordPress Dashboard > Plugins > Installed Plugins
  • Select all and click Deactivate
  • Then activate Elementor only

Now try editing a page. If it works, another plugin was causing the error. Reactivate your plugins one by one. After activating each one, test Elementor again.

This will help you find the plugin that causes the white screen.

  1. Switch to a Default WordPress Theme

Your active theme might be outdated or incompatible. Elementor may fail to load due to errors in the theme code.

Ad Banner

Try switching to a default WordPress theme.

Steps:

  • Go to Appearance > Themes
  • Activate a theme like Twenty Twenty-Four
  • Then test Elementor again

If it loads properly, your original theme needs an update or a fix.

  1. Enable Safe Mode in Elementor

Elementor has a Safe Mode feature that disables all third-party themes and plugins temporarily. This mode helps you edit safely without conflicts.

How to enable it:

  • Go to Elementor > Tools
  • Click on the Safe Mode tab
  • Toggle it to Enable

Now open the page in the editor. If it works, your site has a conflict with another plugin or theme.

This feature is helpful when you don’t want to break the live site.

  1. Update Elementor, WordPress, and PHP

Outdated software often leads to compatibility issues. Always keep your tools up to date.

Check and update:

  • Elementor and Elementor Pro
  • Your WordPress version
  • The active theme
  • Your PHP version (ask your host to update if needed)

Make sure your site is using PHP 8.0 or higher for best performance.

  1. Check for JavaScript Errors in Browser Console

JavaScript errors are hidden but cause major problems in Elementor. You can find them using your browser’s developer tools.

Steps to check errors:

  • Right-click on the blank screen and click Inspect
  • Go to the Console tab
  • Look for any red error messages

Common errors may involve plugin files, failed script loads, or blocked functions. If you see errors here, share them with a developer or plugin support team.

  1. Clear All Cache (Browser, Plugin, and Server)

Caching plugins or server-side cache can show outdated files. These files may cause the white screen even after you’ve fixed the real issue.

Clear cache from all sources:

  • Your browser (CTRL + SHIFT + R or clear browsing data)
  • Your caching plugin (like WP Rocket, W3 Total Cache)
  • Your hosting server cache (through cPanel or host dashboard)

After clearing everything, try loading Elementor again.

  1. Disable Unused Widgets and Extensions

If you use Elementor addons, they may add extra widgets. Too many widgets slow down the editor or cause it to crash.

Tips:

  • Go to Elementor > Settings > Experiments
  • Disable unused experiments or features
  • Turn off unused widgets in addon plugins

Keeping things lean helps Elementor work better.

  1. Switch to a Better Hosting Provider (if needed)

Some hosting companies don’t offer enough resources for heavy plugins like Elementor. If nothing works, consider changing your hosting provider.

Look for these features in a good host:

  • PHP 8.0 support
  • At least 512MB memory limit
  • No strict firewall rules
  • U.S.-based servers for fast local speed

Recommended hosts:

  • SiteGround
  • Cloudways
  • Kinsta
  • Bluehost

These are Elementor-friendly and offer good performance for WordPress.

Pro Tips to Prevent Elementor White Screen Issues

Fixing problems is helpful. But avoiding them is even better. Here are some easy tips to prevent the Elementor edit page shows blank issue from returning.

Keep everything updated:

  • Update Elementor, WordPress, and all plugins regularly
  • Don’t ignore update notifications

Use only trusted plugins and themes:

  • Choose tools from the WordPress plugin directory or verified developers
  • Avoid nulled or outdated themes

Test changes on a staging site:

  • Create a staging copy of your website before major changes
  • This helps you spot problems without breaking your live site

Monitor your website’s performance:

  • Use tools like Query Monitor to find slow plugins
  • Keep an eye on server usage and speed

Clean up unused features:

  • Disable extra Elementor widgets or experiments
  • Remove plugins and themes you no longer need

Use quality hosting:

  • Choose a host that supports PHP 8.0 or higher
  • Make sure they offer enough memory for Elementor

Following these tips can help prevent the blank screen when editing in Elementor in the future.

When to Contact Support or Use a Helpdesk

Sometimes, the issue is too complex to fix alone. If you’ve tried everything and Elementor still shows a blank screen, it’s time to get help.

Here’s when you should consider professional support:

  • You’ve followed all troubleshooting steps with no success
  • You see error messages you don’t understand
  • Your website is mission-critical and can’t afford downtime

WooHelpDesk offers dedicated WordPress and Elementor support. Our experts fix the WordPress Elementor white screen issue quickly and safely. We handle all the tech while you focus on running your business.

Conclusion

The Elementor white screen of death can be frustrating. But with the right steps, it’s also very fixable. You now know what causes this error, how to fix it, and how to prevent it.

If you’re still stuck or don’t want to take the risk, reach out to WooHelpDesk. We’ll make sure your site runs smoothly — no blank screens, no stress.

Need help now? Contact our support team today and get your Elementor back on track!

Website https://www.woohelpdesk.com/blog

Related Posts